e39a Galant Dimmer/Foglight Housing Reproduction

This is my recreation of the OEM Dimmer/Fog housing to the left of the steering wheel on the dash. Finding an OEM one that isn't broken due to 30 year old brittle plastic is impossible anymore. With that being said this isn't a 1/1 replica but its pretty close to it. This is 3d printed using a .4mm nozzle using ABS plastic. I changed the clip design to allow easy removal of the fog switch and rheostat if you ever have to change them out

Note: Due to size and different tolerances this print needs, there are some very slight differences between all prints, no one print is the same. These are being sold as intended to be sanded and painted. Slight surface imperfections could be expected. Any imperfections that are more than what could be sanded away will not be shipped. You will have to remove your own lightbulb cover off your OEM trim and transfer it over into the rectangle slot on the front. Every print will be test fitted before shipping out to make sure you are getting something that works first try.

I have 1 printer at the moment so lead time could be a few days so keep that in mind